|Type||Power over Ethernet Switch|
|Manufacturer Part Number||650-063367|
|Form Factor||Rack Mountable|
|Includes Rack Ears||Yes|
|Main Ports||48x Gigabit RJ45|
|Uplink Ports||4x 10Gb SFP+|
|Installed Transceiver Modules||None|
|PoE Standard||PoE+ (802.3at)|
|Network Management Type||Managed|
|Console Interface||RJ45 Serial Console Port|
|Expansion Module Support||No|
|Installed Expansion Modules||N/A|
|Fans||Internal (Front-To-Rear Airflow)|
|Power Supply||1x Internal 900W|
|Hot-Swap PSU Slots||N/A|
|Power Cable Type||IEC C13 Standard Power Cable|
|Item condition||Used, may have minor marks or scratches|
Juniper Networks EX Series Ethernet Switches provide scalable connectivity for the enterprise market, including branch offices, campus locations, and data centers. The switches run the Juniper Networks Junos operating system (Junos OS), which provides Layer 2 and Layer 3 switching, routing, and security services.
The uplink ports support 1Gb small form-factor pluggable (SFP) transceivers, 10Gb small form-factor pluggable (SFP+) transceivers, or a combination of these transceivers. EX Series switches also support SFP+ passive DAC cables in 1 m, 3 m, 5 m, and 7 m lengths.
EX3300-48P Switch Features
• 48 built-in network ports with 10/100/1000 BASE-T Gigabit Ethernet connectors.
• Four SFP+ uplink ports which can be used to connect to a distribution switch or interconnect member switches of a virtual chassis. By default uplink ports labeled 0 and 1 are configured as 10Gb switch ports and uplink ports labeled 2 and 3 are configured as VCPs (Virtual Chassis Ports). Each of the four ports can be configured in either mode allowing a total of four 10Gb switch ports.
• Virtual Chassis capability — You can connect up to ten EX3300 switches together to form one unit that you manage as a single chassis, called a Virtual Chassis.
• Support for the IEEE 802.3at PoE standard, also known as PoE+ (Power over Ethernet Plus ), delivering up to 30 watts of power per port to support networked devices such as IP phones, wireless access points, and security cameras through network cables, thus eliminating the need for separate power cords for those devices.
Juniper EX3300-48P Network Switch
Juniper EX3300 Series - 48 Gigabit Ethernet Ports with Power over Ethernet (PoE) and 4 built-in 10Gb SFP+ uplink ports.
Make & Model - Juniper EX3300
Model Number - EX3300-48P
Form Factor - 1U Rack
Switch Mounting - Rack ears included
Interface - Gigabit Ethernet
Connector Type - RJ-45, SFP+
Transceiver Modules - None included
Ethernet Ports - 48
SFP+ Ports - 4
PoE Support - Yes
PoE Standard - PoE+ (802.3at)
PoE Budget - 740 W
Manageable- Fully Managed switch with CLI
Stackable - Yes
Power Supply - Internal power supply
Redundant Power Supply - N/A
Fans - Internal
Module Slots - N/A
Power Cable Type - IEC C13 Standard Power Cable
Condition - Refurbished Grade A
Whats Included - Switch + Power Cable
All parts are original unless specified otherwise
Help other ACT Networks users shop smarter by writing reviews for products you have purchased.